Beschreibung
CONTROL
EVERY
POUR.
Designed for convenient gasoline handling,
the ERAYAK 5.3 Gallon Gas Can combines
a durable HDPE container with a
manually controlled press-to-pour spout.
Press downward to dispense fuel.
Release to stop the flow.
A practical solution for
everyday gasoline storage
and outdoor refueling.
Fuel Capacity
Maximum Advertised Flow Rate
Container Material
PRESS TO POUR.
RELEASE TO STOP.
The manually operated spout allows you
to start and stop gasoline flow using
a simple press-and-release action.
Fuel dispensing is controlled directly
by the user rather than by a
fill-level sensing mechanism.
Apply downward pressure along
the direction shown to
begin dispensing fuel.
ACTIVATE FUEL FLOW
PRESS DOWN
Position the spout correctly
at the receiving fuel opening.
Press the spout downward
in the indicated direction
to begin dispensing gasoline.
STOP FUEL FLOW
RELEASE
Release pressure on the
spout to stop dispensing
gasoline.
The release-to-stop
operation gives the user
direct control over
when fuel flow ends.
FLOW PERFORMANCE
UP TO 5.3 GPM
QUICK-FLOW REFUELING
The spout has an advertised
maximum flow rate of up to
5.3 gallons per minute.
Actual dispensing speed
may vary with the container
position, fuel level
and operating conditions.
SPOUT PROTECTION
DUST CAP
KEEP THE SPOUT CLEAN
The protective dust cap
helps keep dust and debris
away from the dispensing
opening when the gas can
is not in use.
Keep the cap properly
secured between refueling
sessions.
CONTROLLED FUEL DISPENSING
Releasing the spout stops
continued fuel dispensing.
This may help limit additional
gasoline release during an
unexpected incident.
It does not eliminate fire
hazards or guarantee that
flame spread will be prevented.
BUILT FOR EVERYDAY
FUEL HANDLING.
Durable HDPE construction and practical
handling features designed for
gasoline storage and refueling.
The container combines a lightweight
body with material properties
suited to routine outdoor use.
HDPE
01 / MATERIAL
DURABLE HDPE BODY
Constructed from high-density
polyethylene (HDPE), the gas can
features UV-resistant,
impact-resistant and
corrosion-resistant properties
for everyday fuel handling.
Its durable yet lightweight
construction is designed for
routine carrying, gasoline
contact and outdoor refueling.
High-Density Polyethylene
UV / Impact / Corrosion Resistant
Gasoline Storage & Refueling
HANDLE
02 / HANDLING
EASY-GRIP HANDLE
The integrated molded handle
provides a convenient grip
for carrying, positioning
and tilting the gas can.
Its practical design helps
users manage the container
during routine refueling
and transportation.
Integrated Molded Handle
Carrying & Positioning
Fuel Container Handling
UV-RESISTANT
Designed to withstand
routine outdoor sunlight
exposure.
IMPACT-RESISTANT
Helps withstand minor
bumps encountered
during normal handling.
CORROSION-RESISTANT
HDPE construction
provides resistance
to gasoline exposure.
THE DETAILS
THAT MATTER.
Review the dimensions,
fuel capacity, material,
flow-control mechanism
and included components
before use.
| SPECIFICATION | PRODUCT DETAILS |
|---|---|
| Product | ERAYAK Gas Can |
| Fuel Capacity |
5.3 US Gallons (Approx. 20 Liters) |
| Product Dimensions | 11.42 × 6.3 × 13.62 in |
| Container Material | High-Density Polyethylene (HDPE) |
| Maximum Flow Rate |
Up to 5.3 GPM (Advertised) |
| Fuel Type | Gasoline |
| Spout Type | Press-to-Pour Spout |
| Flow Control | Manual Press-and-Release |
| Stop Function | Release to Stop Fuel Flow |
| UV Resistance | UV-Resistant HDPE Body |
| Impact Resistance | Impact-Resistant Body |
| Corrosion Resistance | Resistant to Gasoline Exposure |
| Spout Protection | Protective Dust Cap |
| Handle Design | Integrated Molded Handle |
| Available Size | 5.3 Gallon |
PACKAGE CONTENTS
WHAT’S INCLUDED
5.3 Gallon HDPE Container
Manual Dispensing Spout
with Protective Dust Cap
Dimension Note:
Dimensions are listed as supplied
product specifications.
The measurement reference
(body-only or assembled
overall dimensions) has
not been separately specified.
REFUEL IN
3 SIMPLE STEPS.
Follow the correct sequence
when adding gasoline to
compatible outdoor equipment.
Refuel only when the engine
is shut down and completely cool.
01
PREPARE
Turn off the equipment
and allow the engine
to cool completely.
Refuel outdoors, away
from flames, sparks
and other ignition sources.
Check the container
and spout before use.
02
PRESS & POUR
Remove or open the
protective dust cap
as designed.
Carefully position
the spout at the
receiving fuel opening.
Press downward to
dispense gasoline
while monitoring
the fuel level.
03
RELEASE & SECURE
Release the spout
to stop fuel flow.
Allow residual drips
to clear before
removing the spout.
Secure the receiving
tank and close the
protective dust cap
before storage.
REFUELING REMINDER:
Never refuel a running
or hot generator.
Do not overfill the
receiving fuel tank.
Clean spills and allow
gasoline vapors to
dissipate before
attempting to restart
the equipment.
HANDLE FUEL
RESPONSIBLY.
Gasoline is highly flammable.
Proper refueling practices,
container inspection
and storage conditions
are essential for safe
and responsible use.
KEEP AWAY FROM IGNITION
Keep gasoline and
fuel vapors away
from flames, sparks,
cigarettes, hot
surfaces and other
ignition sources.
INSPECT BEFORE USE
Check the container,
spout, dust cap
and connection areas
for damage or leaks.
Do not use damaged
or leaking components.
STORE PROPERLY
Store gasoline in
accordance with
applicable regulations.
Keep the container
away from heat,
direct exposure to
high temperatures
and children’s reach.
CONTROL FUEL RELEASE
Press the spout
only when dispensing.
Release to stop
the fuel flow.
Avoid spills
and keep the
container properly
secured between uses.
IMPORTANT SAFETY INFORMATION:
The press-to-pour spout
provides manual fuel-flow control.
Stopping active dispensing
may help limit additional
fuel release, but does not
eliminate the risk of ignition
or guarantee prevention
of flame spread.
Never refuel an operating
or hot engine.
Follow all applicable
safety requirements.
FREQUENTLY ASKED
QUESTIONS.
Useful information about
capacity, construction,
flow control and
gasoline refueling.
How does the press-to-pour spout work?
Position the spout
at the receiving fuel opening,
then press downward
to dispense gasoline.
Release pressure to
stop the fuel flow.
Does the spout stop automatically
when the receiving tank is full?
No. Fuel flow is controlled
manually through
the press-and-release action.
Monitor the receiving
tank and release
the spout before overfilling.
What is the maximum flow rate?
The product has an advertised
maximum flow rate of up to
5.3 gallons per minute.
Actual flow may vary
depending on the
pouring position,
fuel level and
operating conditions.
What are the product dimensions?
The listed dimensions are
11.42 × 6.3 × 13.62 inches.
The published specification
does not separately identify
whether these measurements
refer to the container body
or the fully assembled product.
Is the container UV-resistant?
The HDPE container is
described as UV-resistant
for routine outdoor use.
Store gasoline according
to applicable safety guidance
and avoid prolonged
exposure to excessive heat.
Is the gas can impact-resistant?
The HDPE body is described
as impact-resistant for
normal handling conditions.
Inspect the container
for cracks or damage
after any significant impact.
Do not use the product
if it is damaged.
What does the dust cap do?
The protective dust cap
helps keep dust and debris
away from the dispensing
opening when the spout
is not being used.
Keep it properly secured
between refueling sessions.
What material is the gas can made from?
The container body is
made from high-density
polyethylene (HDPE),
a lightweight plastic
commonly used in
gasoline fuel containers.
The product is described
as UV-resistant,
impact-resistant and
corrosion-resistant.
Can I use the gas can
to refuel my generator?
The product is designed
for gasoline refueling.
Turn the generator off
and let it cool
completely before refueling.
Position the spout
carefully and follow
the generator’s
operating instructions.
What is included in the package?
The package includes
one 5.3 Gallon gas can
body and one
press-to-pour spout assembly
with its dust cap.
Gasoline is not included.
How should I maintain the gas can?
Inspect the container
and spout for visible
damage or leaks.
Keep the dispensing
opening clean and
protect it with
the dust cap.
Store the container
properly and follow
applicable gasoline
storage regulations.
ERAYAK 5.3 GALLON GAS CAN
Durable HDPE construction.
Press-to-pour flow control.
Up to 5.3 GPM advertised
maximum flow rate.
Designed for practical
gasoline handling with
UV-resistant,
impact-resistant and
corrosion-resistant
material properties.
Press to pour.
Release to stop.
